| |
General
All of Rubber Rolls formulas for both rubber and polyurethane roll covers have been
developed in-house by our technical staff
Rubber
| Purple Plus |
Our newest compound |
| Blue Multi-Max |
A blue, synthetic non marking covering; a very tough, abrasion resistant
material which approaches the abrasion resistance of polyurethane at less cost, available
in 70-75 Shore A hardness |
| Coreseal |
A very hard acid resistant material used to encapsulate a metal core and
journals for protection against cutting and chemical attack of the core. Our Super Sub
series covers are normally applied over this material. |
| Pro-Rez |
A new rubber roll cover which has proven very successful for severe
caustic and acid applications. Available in Shore A hardness of 70 and 80 |
| Rub-Roc |
A true "bone hard" rubber cover, when a very hard cover is
desirable, very resistant to abrasion, cuts and chemical attack, Shore D hardness of 55-60 |
| WearRite |
An extremely high abrasion, cut and tear resistant compound which exhibits
excellent dynamic properties, in 75-80 Shore A hardness. |
Polyurethane
| SuperCril |
Is available in hardness of 70, 80 and 90 Shore A durometer. It possess
high load bearing capacity, good fluid resistance with excellent abrasion and tear
resistance. |
| UltraCril |
Is available in 80, 90, and 95 Shore A durometer and in 60, 70 and 75
Shore D durometer hardness. This polyurethane's exhibit very low heat build-up under
high load - high speed operations. UltraCril's abrasion and tear resistance compares
closely with Ultra-Max, with its fluid resistance similar to SuperCril. |
| Ultra-Max |
Is available in 50, 60, 70, 80 and 90 Shore A durometer and possess
exceptionally high tear and tensile properties with superior abrasion resistance and
excellent oil resistance. |
Non-woven Roll Cover
| CD Roll |
Is made of a non-woven material( compressed discs) which is appropriate
for many roll positions. When used in the correct application, it will provide very long
cover life and top performance. It's chief properties are a very high coefficient of
friction, elasticity and chemical resistance, offering a ling life and a "self
healing" characteristic against minor cuts or indentations. Hardness and cover
material type will depend on the customer's particular processing requirements. |
|
